New Zealand sourced stock, with full local warranty.
Description
- High-voltage JFET input and MOSFET output, which results in wider soundstage and less distortions
- Made in USA
- Switchable gain toggle switch
- Mjolnir can serve as a preamp for your power amps or powered monitors
- Swap the standard 6BZ7 tubes for anything in the 6DJ8, 6922, ECC88, and 2492 families
Frequency response |
20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dB |
Maximum Power, 32 ohms |
8.0W RMS per channel |
Maximum Power, 50 ohms |
5.0W RMS per channel |
Maximum Power, 300 ohms |
850mW RMS per channel |
Maximum Power, 600 ohms |
425mW RMS per channel |
THD |
<0.005%, 20Hz-20KHz, at 1V RMS |
IMD |
<0.006%, CCIF, at 1V RMS |
SNR |
>104db, unweighted, referenced to 1V RMS, in low gain mode |
Crosstalk |
>-75dB, 20 Hz-20KHz |
Output Impedance |
1 ohm (high gain), 0.3 ohms (low gain) |
Input Impedance |
50K ohms |
Gain |
8 (18dB) or 1(0db), via front-panel switch |
Topology |
Tube voltage gain or solid-state tube voltage gain, cross-shunt push-pull Crossfet output stage, noninverting, single voltage gain stage |
Power Supply |
Specific Circlotron 4-secondary output stage transformer with over 65,000uF filter capacitance, plus dedicated transformer for high-voltage discrete-regulated front end stage with 200V rails and over 4,000uf of filter capacitance |
Inputs | One pair balanced XLR, one pair single-ended RCAs, switchable via front panel switch |
Outputs | One 4-pin balanced female XLR, one ¼” TRS phono, one pair 3-pin male XLR preamp, one pair single-ended RCA |
Power Consumption | 45W |
Size | 16 x 8.75 x 2.25” |
Weight | 13 lbs |
Warranty | Solid State Headphone Amplifier (60 Months) |
Tubes (90 Days) |
- Schiit Audio Mjolnir 2 Headphone Amplifier
- Power cord