| Goldmund MIMESIS STATEMENT Preamplifier Specifications | ||
| Audio Performance | ||
| Frequency Response | ±3 dB, 0.2 Hz–1.5 MHz | |
| Total Harmonic Distortion (THD+N%) | 0.0002% (unbalanced input to unbalanced output) | |
| Intermodulation Distortion (IMD) | IMD+N%: 0.0006% (unbalanced input to unbalanced output) | |
| Signal-to-Noise Ratio | On line input >130 dB Weighted ASA A: >138 dB |
|
| Slew Rate | 21 V/μs | |
| Propagation Delay | 200 ns | |
| Inputs | ||
| Input Sensitivity | 100 mV | |
| Input Impedance | 51 kΩ | |
| Maximum Input Level / Balanced | 9.6 Vrms | |
| Maximum Input Level / Unbalanced | 4.8 Vrms | |
| Outputs | ||
| Nominal Output Level | 1.55 Vrms | |
| Maximum Output Level / Balanced | 9.6 Vrms | |
| Maximum Output Level / Unbalanced | 4.8 Vrms | |
| Output Impedance | 50 Ω | |
| Architecture & Power | ||
| Architecture | Three-chassis fully symmetrical architecture |
|
| Power Supply | New-generation power supply electronics with discrete regulation | |
| Mains Voltage | Nominal line voltage: 115 V or 230 V (Input voltage range: ±10%) | |
| Rated Power Consumption | 75 W per power supply (150 W in total) | |
| Fuse | 5 A for 115 V ; 2.5 A for 230 V | |
| Connectivity & Control | ||
| Analog Inputs | 3 × XLR balanced (left & right) 7 × XLR unbalanced (left & right) |
|
| Analog Outputs | 3 × XLR balanced (left & right) 3 × RCA unbalanced (left & right) |
|
| Trigger Outputs | 2 × Jack Trigger 12 V output (external control) | |
| Tape Connections | 2 × RCA unbalanced (left & right) | |
| Signal Ground / Link Float | 1 × Black GND binding post* 1 × Green AC earth binding post* 1 × Link/Float bridge connection (switch)* *per chassis |
|
| Remote Control | IR remote controller with mechanical chassis | |
| Dimensions & Weight | ||
| Overall Configuration | 3 chassis | |
| Chassis Dimensions (W × H × D) | Preamplifier: 440 × 161 × 430 mm Power Supply: 440 × 161 × 411 mm |
|
| Weight Per Chassis | Preamplifier: 22 kg Power Supply: 24 kg |
|
| Total Weight | 70 kg | |