New Zealand sourced stock, with full local warranty.
Open your mind and experience the true depth of sound. An industry defining debut for our M-10X flagship amplifier.
Looking ahead to the 100th anniversary of our founding in 2025,we have returned to the fundamentals of music playback and have finally achieved a Luxman milestone, while still looking toward the future, we present our new generation flagship stereo power amplifier, the M-10X.
Amplified feedback engine that brings music to life LIFES Version 1.0
Luxman will celebrate our 100th anniversary in 2025 and we are proud to announce the successor to our ODNF* feedback circuitry, which has contributed to the audio quality of our amplifier products since 1999. We have developed a new amplifier feedback circuit, LIFES*, which has acquired realistic, fresh and rich musicality and overwhelming audio performance. LIFES is based on the technical concept of our renowned ODNF circuit and realizes excellent, dynamic characteristics without feeding back any of the original audio input signal to the main amplifier, achieving a remarkably natural sound quality, almost if it were a non-feedback equipped circuit. The design has been conceived and expanded upon from first principles using simulation technology and painstaking research. By repeatedly auditioning, rigorously scrutinizing and combining specially selected components, we have achieved supreme performance characteristics and a level of quality suitable for use in Luxman’s next-generation products. This is the birth of the epoch-making amplification feedback engine LIFES Version 1.0, which plays a key role in the amplifier products that will appear in the future, starting with the M-10X, and breathes new life into music.
Overwhelming power linearity and an instantaneous maximum power output of 1,200W + 1,200W (1Ω)
The role of the power amplifier is to faithfully amplify the music signal sent from the control amplifier to the output and drive your speakers accurately while fully drawing out the characteristics of those speakers. With “LIFES” installed in the M-10X and by reconstructing the entire circuit, we succeeded in reducing the number of parallel elements while improving performance and reducing distortion during amplification by half. In addition, the redesigned constant voltage circuitry constitutes a highly stable power supply that fully supports the AC and DC power demands. We have adopted a design that can maintain high performance with more stability. The current amplification stage has a 4x2 output configuration that combines two three-stage Darlington circuits and quadruple paralleled push-pull amplifier circuits that handle various load conditions, and instantaneously develops up to 1,200W+1,200W (1Ω) from a rated output of 150W+150W (8Ω). We have achieved complete power linearity up to 1,200W (1Ω). Along with pure class A operation up to 12W with careful bias current setting, it achieves both overwhelming power and sound quality with a sense of density at a high level.
Highly regulated transformer
The power supply section supports the overwhelming power and drivability of the M-10X, with flat copper transformer winding wound tightly to conserve space, reducing line capacitance, improving the coupling force and stabilizing the magnetic field. The EI-type highly regulated power transformer has a large capacity of 1,250VA (instantaneous maximum 2,500VA), we have obtained tremendous regulation performance that does not waver with any load fluctuations.
Original custom components
Every component in the circuitry is an important factor that affects the audio performance and musicality of this product. In the M-10X, we thoroughly listened, testing the audio performance of various capacitors and resistors, as well as wiring materials and terminals, and introduced a large number of original custom components that were carefully selected via advanced technology and sensibility.
100μm thick non-angled circuit board tracing
All audio circuit boards in the M-10X have 100μm thick, low resistance, gold plated, peel coat tracing that eliminates dielectric effects. In addition, we thoroughly implement a design policy that prioritizes sound quality in every respect, such as non-angled circuit board tracing that keeps the pattern width of the signal line constant and draws a smooth curve to realize smooth and stress-free signal transmission.
- Luxman LIFES feedback technology
- 1200W + 1200W instantaneous maximum power output
- Three-dimensional housing design with more pronounced presence
- Analog meters that express the dynamics of music
- Highly regulated transformer
- Original custom components
- 100μm thick non-angled circuit board tracing
- Traditional highly stable power supply configuration
- Sound quality-oriented RCA terminals and AC inlet
- Anti-vibration and loop-less chassis structure
150W + 150W (8Ω)/at stereo
|Instantaneous max. output||1,200W + 1,200W (1Ω)/at stereo
2,400W (2Ω)/at monaural
|Input Sensitivity||1.24V/150W (8Ω)
|Input Impedance||Unbalanced 51kΩ
|Frequency Response||20Hz to 20kHz (+0, -0.1dB)
1Hz to 130kHz (+0, -3.0dB)
|Total Harmonic Distortion||0.003% or less (1kHz/8Ω)
0.04% or less (20Hz to 20kHz/8Ω)
|S/N Ratio (IHF-A)||117dB|
290W (under no signal)
1.0W (at standby)
|External Dimensions||440(W) x 224(H) x 488(D) mm (front side knob of 2mm and rear side terminal of 38 mm included in depth)|
- M-10X power amplifier
- Trigger cable (Modular/3.5mm monaural)
- Power cable