New Zealand sourced stock, with full local warranty.
2xMA12070 Fully balanced Class D amplifier
Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product.
High output power
PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1% output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers.
Balanced + Single-ended inputs
PA3s provides TRS balanced input and RCA single-ended input. The use of balanced input eliminates potential ground loop problems giving the pristinely clean audio without any hum.
Two inputs are selectable using front panel button. PA3s will remember the input selected when it was turned off.
"Comfort zone" with lowest distortion
The lowest THD+N of PA3s is in the range of 10-20W output, which happens to be the power range commonly used for listening to music. Everything is just in the right condition.
D10 Balanced USB DAC is a good match for the PA3s
D10 Balanced DAC can provide high-fidelity USB decoding and TRS balanced output. When used with the PA3s, it is equivalent to adding a high-performance USB input to PA3s. This combination is simple and efficient.
With the help of a DAC, the function is expanded to a greater extent
PA3s can be used with a DAC to expand the categories of digital inputs; if used with a DAC+HPA, more comprehensive functions can be achieved.
- Fully balanced Class D amplification
- MA12070 x2 Merus Chip
- High output power 80W x2 @4Ohms
- Balanced and singled-ended inputs
- Pair the PA3s with DX3Pro+ DAC to expand digital inputs
THD+N @1kHz (A-wt)
SE IN: <0.0050% @4Ω 5W
|SE IN: <0.0040% @8Ω 5W|
|BAL IN: <0.0045% @4Ω 5W|
|BAL IN: <0.0040% @8Ω 5W|
THD @20-10kHz (20kBW)
SE IN: <0.0080% @4Ω 5W
|SE IN: <0.0070% @8Ω 5W|
|BAL IN: <0.0070% @4Ω 5W|
|BAL IN: <0.0060% @8Ω 5W|
SNR @MAX OUT 1kHz (A-wt)
SE IN: 107dB
|BAL IN: 112dB|
Dynamic Range @1kHz (A-wt)
SE IN: 107dB
|BAL IN: 112dB|
SE IN: 20Hz-40kHz (±0.1dB)
|BAL IN: 20Hz-40kHz (±0.1dB)|
|Output Level||SE IN: 46Vpp @4Ω|
|SE IN: 48Vpp @8Ω|
|BAL IN: 46Vpp @4Ω|
|BAL IN: 48Vpp @8Ω|
|Noise (A-wt)||SE IN: <70uVrms|
|BAL IN: <70uVrms|
|Channel Crosstalk @1kHz||SE IN: -96dB|
|BAL IN: -100dB|
|Input Sensitivity||SE IN: 0.92Vrms|
|BAL IN: 1.75Vrms|
|Gain||SE IN: 25.2dB|
|BAL IN: 19.5dB|
|Channel Balance||SE IN: 0.5dB|
|BAL IN: 0.5dB|
|Output Power||80W x 2 @4Ω THD+N<10%|
|45W x 2 @8Ω THD+N<10%|
|65W x 2 @4Ω THD+N<1%|
|37W x 2 @8Ω THD+N<1%|
- Topping PA3s Power Amplifier
- AC to DC Power Adapter
- AC Power Cable