Price:
$2,599
*Check with our team or your local store for availability.
We guarantee that all of our stock is 100% genuine,
New Zealand sourced stock, with full local warranty.
New Zealand sourced stock, with full local warranty.
Description
- 2 stereo inputs, balanced via XLR, unbalanced via RCA
- Inputs switchable on the front panel
- +/- 18 dB Pre-Gain for a perfect match of the HPA V222 between source and headphones
- Volume control with Alps RK 27 attenuator
- Big 38 mm massive aluminum knob
- Powerful balanced stereo amplifier (4 power stages)
- 3500 mW Pmax into 50 Ohm
- 23,2 V RMS into 600 Ohm
- Delayed coupling of the headphones to the amp after power-on
- Headphone outputs: 1 x Pentaconn, bal., 1 x 4-pin XLR, bal., 1 x 1⁄4” jack, unbal.
- Built-in power supply with toroidal transformer
- 22.000 uF filter capacity
Analogue input parameter |
|
|---|---|
| Inputs (stereo) | 1 x XLR balanced, 1 x RCA, unbalanced |
| Max. input voltage | + 21 dBu, |
| Input impedance | 10 kohm |
Headphone amp parameter |
|
| Nominal input sensitivity | +6 dBu |
| Feedback gain | +2 dB unbal., +8 dB bal. |
| PRE-GAIN | -18 / -12 / -6 / 0 / +6 / +12 / +18 dBr |
| Frequency range | 5 Hz ... 250 kHz (- 0,5 dB) |
| Output impedance | 0,25 Ohm unbal., 0,5 Ohm bal. |
| Damping factor (Load 50 R) | 200 unbal., 100 bal. |
| Dynamic range | > 131 dB (A-wtd) |
| Noise | < -102 dBu (A-wtd) |
| THD+N (1kHz/2x10V/100R=1W) | < -102 dB / < 0,0008 % |
| THD+N (1kHz/2x4V/32R=0,5W) | < -100 dB / < 0.001 % |
| Crosstalk | -100 dB (1 kHz) / -95 dB (15 kHz) |
| Headphone outputs | 1 x Pentaconn, bal., 1 x 4-pin XLR, bal., 1 x 1/4“ (6.3 mm) TRS jack |
General |
|
| Supply voltage | 230 V AC / 115 V AC max. 15 VA |
| Front, Back | 5 mm / 2,5 mm Aluminum, black anodized |
| Case | 4 mm Aluminum, black anodized |
| Case dimensions | 170 x 54 x 228 mm (W x H x D) |
| Overall dimensions | 170 x 65 x 252 mm (W x H x D) |
